Shenlong Pump News Center

Safety valve is a safety valve, its opening and closing parts under the action of external force in a normally closed state, when the equipment or pipeline in the medium pressure increases, more than the set value automatically open, discharged to the out

The normal operation of pumps, accompanied by sound always has a certain rhythm and rhythm. As long as the familiar and master these normal melody and rhythm, human auditory function can be compared through the device is the heavy, complex and strange, ch

The net distance between the two pumps should not be less than 700mm, the front end of the pump operating channel width should not be less than 1000mm, for the multi-stage pump, the front end of the pump overhaul channel width should not be less than 1800

1. For open or semi open centrifugal pumps arranged, a pump to pump the axis of the motor and the pipe gallery axis perpendicular to the.

2. For the indoor layout of the pump, when the liquid temperature is higher than the transmission of spontaneous c

Open layout of the pipeline centrifugal pump arranged in the gallery below or on the side of the tube, the liquid can be arranged in the vicinity of suction device. The main advantage is well ventilated, easy operation and maintenance, if pump arranged i

In order to enhance the use of submersible pump control, prevention of corruption facilities, to prevent the leakage of submersible pump or cable to produce, to ensure personal insurance, please note the following points:
1. All the submersible pump into

The hot water circulation pump mainly has the following several kinds of faults: does not have the water, the insufficient flow, the noise and vibration, the water leakage

1. Liquid mixed with gas. Improved suction pressure exhaust.
2. Produce cavitation. Vacuum reduction.
3. Pipe support instability. Solid line.
4. Bearing damage. Replace bearing.
5. Motor overload heating operation. Regulating flow off small outlet va

The hot water circulation pump mainly has the following several kinds of faults: does not have the water, the insufficient flow, the noise and vibration, the water leakage

The hot water circulation pump mainly has the following several kinds of faults: does not have the water, the insufficient flow, the noise and vibration, the water leakage

Hot water circulating pump is a new generation of energy saving and environmental protection pipeline pump based on ISG and ISW type centrifugal pump.

Pipeline pumps are widely used in industrial production and agriculture, pipeline centrifugal pump with stable performance, small size, simple structure, convenient operation, less fault, long service life, low cost, etc..

Pipeline pumps are widely used in industrial production and agriculture, pipeline centrifugal pump with stable performance, small size, simple structure, convenient operation, less fault, long service life, low cost, etc.. However, as long as there is a n

The maintenance of the pump should pay attention to several main parts: rolling bearings, sealing ring, mechanical seal

1. Before the start of the pump casing is higher than the impeller on the edge of the impeller, open the suction line of the valve, open the outlet control valve
2. Disassembly and assembly, according to the total assembly requirements of the product.
3

1. Before the start of the pump casing is higher than the impeller on the edge of the impeller, open the suction line of the valve, open the outlet control valve
2. Disassembly and assembly, according to the total assembly requirements of the product.
3

S, SH type single-stage double suction pump inlet and outlet are at the bottom of the axial line of the pump, horizontal direction and the vertical position of the Zhou Xiancheng, pump shell. Open and maintenance without disassembling the inlet, discharge

Including: the characteristics of the media, the media containing the particle diameter of the particle, the amount of content, the media temperature, the required flow pressure piping system data

In a pump is a large general-purpose machinery and equipment, it widely application in petroleum, chemical, electric power, metallurgy, mines, ship selection, light industry, agriculture, civil and defense departments, occupies an important position in th

Pump in the open (open loop), also known as single stage double suction centrifugal pump and its main characteristics for the transmission medium flow, head in the open operation of the pump working principle: the impeller is installed in the pump shell a

The water pump is connected with the motor and pump as a whole, the pivot bearing of the motor rotor is a pump bearing, which is a rigid power transmission to make the pump impeller rotating work pressure reducing valve. Between the pump impeller and the

1. Water pump before use should pay attention to: voltage compliance and electricity safety, because the water pump is working in humid environment, the power switch should be installed on the leakage protection switch.
2. Do not move the pump suction pi

Application of clear water pump:
1. Suitable for garden irrigation, hotels, villas, high-rise water supply and irrigation of farmland, excluding factories, mines, ships and other water
2. Suitable for small flow, high lift, small power occasions.

High temperature medium transport of chemical pump structure, materials and auxiliary system put forward higher requirements, the following talk about the different temperature changes on the cooling requirements of the company and the application of chem

The sewage pump can be equipped with full automatic safety protection control cabinet according to the user's need, and the absolute protection of the leakage, leakage, overload and over temperature of the self sucking non clogging sewage pump is improve