Centrifugal Multistage Water Pump

30 years professional submersible pump manufacturer in China

Now looking for global Centrifugal Multistage Water Pump distributor,with high quality pump,intimate service and big market prospects.

Centrifugal Multistage Water Pump

Home > Products > D Type Pump > Centrifugal Multistage Water Pump

Centrifugal Multistage Water Pump

Flow:12.6-1260m3/h
Lift:13-232.8m
Caliber:50-150mm
Power:
Temperature:<120 °C
Qualitycertificate:One year warranty and lifelong maintenance
 
Skype : dragonpumps dragonpumps
E-Mail : enquiry@apkpump.com
Whatsapp/Wechat : 0086-17537187726
Get Quotation    Leave Message

D phase multistage clean water pump segmental centrifugal pump is suitable for pumping clean water without solid particles or other liquids whose physicochemical property is similar to that of clean water. It is widely applied to supply water of low or high pressure boiler. It is also used for high pressure water supply and drainage of industrial and urban. The temperature of medium delivered should be in the range of -20°C to 150°C and the water pump inlet pressure should be less than 0.6M Pa.
Our pump products have already passed certificate of quality system ISO9001 and ISO2000. We have strict and normative controlling system about the design, manufacturing and service of our products. So we have sufficient guarantee about our product quality.

water-pump.jpg

Product feature:

1. About D model Pumps, inlet and exit are both vertically upward. The inlet section, middle section, discharge section and bearing body of pump are connected into one by tightening bolt. Customer can decide the pump stage according to pump head.

2. The rotor part of pump is composed of axis, impeller, shaft sleeve and balance disk, etc. The quantity of impeller is decided by the stage quantity of pump. The components of axis are connected by flat key and spindle nuts. The whole rotor is supported by antifriction bearing or sliding bearing. Balance disc bears axial force instead of bearing. When pump is running, the rotor can move in the same axial direction. Annular ball bearing can not be used about this series of pumps. They are adopted antifriction bearing. Antifriction bearing is lubricated by grease and sliding bearing is lubricated by thin oil. In addition, they can lubricate themselves by oil ring and cool themselves by circulation water.
 

Centrifugal Multistage Water Pump model parameter

Model Flow Lift Power Diameter
125D25*9-119 119 157.5 90 0
125D25*9-101 101 193.5 90 0
125D25*9-72 72 230.4 90 0
125D25*8-119 119 140 75 0
125D25*8-101 101 172 75 0
125D25*8-72 72 204.8 75 0
125D25*7-119 119 122.5 75 0
125D25*7-101 101 150.5 75 0
125D25*7-72 72 179.2 75 0
125D25*6-119 119 105 55 0
125D25*6-101 101 129 55 0
125D25*6-72 72 153.6 55 0
125D25*5-119 119 87.5 45 0
125D25*5-101 101 107.5 45 0
125D25*5-72 72 128 45 0
125D25*4-119 119 70 37 0
125D25*4-101 101 86 37 0
125D25*4-72 72 102.4 37 0
125D25*3-119 119 52.5 30 0
125D25*3-101 101 64.5 30 0
125D25*3-72 72 76.8 30 0
125D25*2-119 119 35 18.5 0
125D25*2-101 101 43 18.5 0
125D25*2-72 72 51.2 18.5 0
100D16*9-72 72 91.8 37 0
 397    1 2 3 4 5 6 7 8 9 10 11 12 next last

You May Need These Pumps

Get Quotation & Leave Message

Please send email to : enquiry@apkpump.com
Or leave message in following form.
@
Please briefly tell us your needs (pump type, working envirment)