WQK submersible sewage cutter pump

WQK Cutting Sewage Pump Overview:

1. Used in waste water discharge system of enterprises
2. Used in urban sewage treatment plant
3. Used in drainage system in metro station, basements and air-defense buildings
4. Used to dispose sewage in hospitals, hotels, high-rise buildings
5. Used in sewage pumping station in residential areas
6. Used to discharge slurry in municipal engineering projects, construction sites
7. Used as water supply equipment in tap water plant
8. Used for farmland irrigation or drainage in rural areas
9. Used in mines, water treatment systems, exploration projects
10. Used to draw river mud, saving labor cost

Using conditions:

1. Fluids temperature should not be more than 40°C, PH value 4~10, density no more than 1.3×103kg/m³.
2. Three phase power source, frequency 50Hz, voltage 380V (error 10%).
3. The pump shall not be placed deeper than 5 meters under water.
4. Pumps whose power is 5.5KW or above shall be equipped with proper motor protector starter.
5. If it has been used to pump viscous slurry, it must be put in clear water and run for a few minutes before you use it again.

Product features:

1. Compact structure, convenient to install, use and move.
2. Adopting vertial dual-flow channel impellers (high-lift pump adopts centrifugal impellers); this series of pump has excellent performance in draining sewage.
3. Its motor is sealed with hard anti-corrosive ceramic of both single and double end faces, so, it is very effective in preventing leakage, and can run more safely and reliably.
4. Adopting cooling sleeve of WQS water-filled pump, it can run above the fluids surface for a short time and drain the leaking fluids on ground.

WQK submersible sewage cutter pump model parameter

You May Need These Pumps