In the application of the booster pump system, the ordinary submersible electric pump is installed in the vertical vessel. In this application, the booster pump system can be used in the water injection, fluid transport, corrosion of liquid handling and delivery systems, such as the tail booster. According to the pressure of the inlet and outlet, the booster pump system can be used in series and parallel. Tandem use can increase the pump outlet pressure, the pressure can reach 35MPa. Parallel use can increase the ultimate displacement. When there is a change in the injection or pressure situation, you can replace the other specifications of the pump, the pump is very easy.
Booster pump system does not require complex ground equipment, only 1.22m * 1.22m area on it. In the cold area, no special heat preservation equipment is needed, and only a standard vertical spray box and a heat insulation pipe are used to protect the ground equipment. Booster pump system is not vibration, the layout of the offshore platform, water wells and infusion is a great advantage. Because the booster pump system under the ground, no noise, which is very useful for urban construction.
The booster pump during normal operation, the suction pressure is very high, but the internal mechanical seal is poor work under very low pressure, which is the main protection device plays a role to balance the pressure and suction pressure, thus reducing the damage of the mechanical seal. Booster pump can be in the suction port pressure is greater than the normal operation of the case of 28MPa.
